Home > Networking - Wired > D-Link DGS-105 5-Port 10/100/1000Mbps Unmanaged Metal Desktop Gigabit Ethernet Switch

D-Link DGS-105 5-Port 10/100/1000Mbps Unmanaged Metal Desktop Gigabit Ethernet Switch

D-Link DGS-105 5-Port 10/100/1000Mbps Unmanaged Metal Desktop Gigabit Ethernet Switch
Item# NU-634-055-0001-unit
$41.07

Product Description

D-Link’s DGS-105 Gigabit Ethernet switch provides a cost-effective way for SOHO and SMB to create a small network and connect computers, wireless Access Points, IP cameras, network printers and other Ethernet devices quickly and easily without complicated configurations. This switch comes with 5 Gigabit Ethernet ports with an auto-sensing function to detect the maximum speed of the connected devices, allowing you to run your network with the best possible performance. Its fanless design makes the DGS-105 completely silent, ideal for offices, libraries or meeting rooms.


  • 5 Port Gigabit Ethernet Switch
  • Plug-n-Play Installation
  • Speeds Up to 10x Faster than 10/100 Ethernet
  • IEEE 802.1P QoS Support for Superior Traffic Prioritization
  • Intelligent cable diagnostics for efficient troubleshooting
  • Gigabit Ports for Incredible Wired Network Speeds
  • High reliability with Rugged Metal Case and High MTBF
Robust design
The DGS-105 is designed with durability and performance in mind. The sturdy metal housing will protect the switch against accidental harm, while helping to dissipate heat and to reduce stress on internal components. The visible LEDs allow for an easy reading of each port status and speed, helping to troubleshoot connectivity problems. For a convenient placement, the DGS-105 comes with a wall mounting kit and a slot for a Kensington security lock to protect it from theft.

QoS (Quality of Service)
Despite being an unmanaged, Plug and Play switch, the DGS-105 is able to classify network traffic by assessing the 802.1p field in the Ethernet frames, and forward them out of its ports depending on their priority. This allows for a smooth integration of video, voice and data traffic without delays or loss of quality.


Cable diagnostics function
The cable diagnostics function enables users to quickly troubleshoot faulty network cables that may lead to transmission errors. At startup, the switch performs a micro-test to assess the quality of the cables connected to its ports. If a fault is detected, the amber LED will lit up. If the cables pass the test, the green LED will be illuminated, indicating that the network is error-free. This feature can save valuable time when trying to single out a faulty cable that causes problems in the whole network.


Power-saving technology
The DGS-105 is part of D-Link Green™, D-Link’s eco-friendly technology, providing energy savings, reduced power consumption, and a longer product lifespan without sacrificing operational performance or functionality. This switch implements the 802.3az Energy Efficient Ethernet (EEE) standard, which can save a substantial amount of energy by detecting the port status, putting them in low-power, stand-by mode when no network traffic is detected. Additionally, the Green Ethernet™ technology in the DGS-105 can detect the length of the network cables connected to its ports and provide only the right amount of energy required. This helps businesses to save money by reducing their electricity bills with no compromise on performance.


  • D-Link DGS-105 5-Port 10/100/1000Mbps Desktop Gigabit Ethernet Switch


  • General Features:
  • Metal housing
  • Five (5) ports
  • 10/100/1000 Gigabit Ethernet ports
  • Green Technology Energy Savings
  • MAC Address Table Size: 2K
  • Switch Fabric Forwarding Capacity: 10 Gbps
  • IEEE 802.1p QoS
  • IEEE 802.3x Flow Control
  • ANSI/IEEE 802.3 Nway Auto-Negotiation
  • Energy-Efficient Ethernet (EEE)
  • Supports Jumbo Frames
  • Supports Cable Diagnostics Function
  • Plug-and-Play


  • Standards:
  • IEEE 802.3 10BASE-T Ethernet (twisted-pair copper)
  • IEEE 802.3u 100BASE-TX Fast Ethernet (twisted-pair copper)
  • IEEE 802.3ab 1000BASE-T Gigabit Ethernet (twisted-pair copper)
  • ANSI/IEEE 802.3 NWay auto-negotiation
  • IEEE 802.3x Flow Control
  • IEEE 802.1pQoS
  • IEEE 802.3az Energy-Efficient Ethernet (EEE)


  • Protocol:
  • CSMA/CD


  • Data Transfer Rates:
  • Ethernet: 10 Mbps (half duplex), 20 Mbps (full duplex)
  • Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex)
  • Gigabit Ethernet: 2000 Mbps (full duplex)


  • Topology:
  • Star


  • Network Cables:
  • 10BASE-T: UTP CAT 3, 4, 5/5e (100 m max.), EIA/TIA-586 100-ohm STP (100 m max.)
  • 100BASE-TX, 1000BASE-T: UTP CAT 5/5e (100 m max.), EIA/TIA-568 100-ohm STP (100 m max.)


  • Media Interface Exchange:
  • Auto MDI/MDIX adjustment for all ports


  • LED Indicators:
  • Per port: Link/Activity/Speed
  • Per device: Power


  • Transmission Method:
  • Store-and-forward


  • MAC Address Learning:
  • Automatic update


  • Packet Filtering/Forwarding Rates:
  • Ethernet: 14,880 pps per port
  • Fast Ethernet: 148,800 pps per port
  • Gigabit Ethernet: 1,488,000 pps per port


  • RAM Buffer:
  • 128 KB per device


  • Jumbo Frames:
  • 9,000 Bytes


  • QoS:
  • 4 Queues,strict mode


  • Power Specifications:
  • DC Input: External 5V/1 A Level “V” Power Adapter
  • Power Consumption:
  • Power On (Standby):

    • DC input: 0.5 watts
    • AC input: 1.0 watts

  • Maximum:

    • DC input: 2.01 watts
    • AC input: 3.10 watts

  • Heat Dissipation:

    • Power On (Standby) AC input: 3.41 BTU/h
    • Maximum DC input: 6.854 BTU/h


  • MTBF:
  • 1,688,338 hours


  • Environmental Specifications:
  • Operating: 32 to 130 °F (30 to 50 °C)
  • Storage:-14 to 158 °F (10 to 70 °C)
  • Operating Humidity: 10% to 90% RH non-condensing
  • Storage Humidity: 5% to 90% RH non-condensing


  • Unit Dimensions:
  • 1.1 x 3.8 x 3.9-inches (H x W x D)
  • Weight: 10.08 oz


  • Regulatory Approvals:
  • FCC
  • ICES-003
  • CE
  • C-Tick
  • VCCI
  • cUL
  • CB

  • D-Link DGS-105 5-Port 10/100/1000Mbps Desktop Gigabit Ethernet Switch
  • AC power adapter